GENERAC MLT3060

Engine

  • Kubota® D1005-E3BG1-MGM-1 – liquid cooled, diesel engine
    • Standby – 13.1 hp @ 1800 rpm
    • Prime – 11.7 hp @ 1800 rpm
    • 3 cylinder
    • 1.0 L displacement
  • Fuel consumption (prime) – 0.50 gph (1.89 Lph)
  • 60 Hz engine/generator
  • Industrial engine exhaust system
  • Rubber vibration dampers isolate engine/generator from frame
  • Cooling system capable of operating at 120°F (49°C) ambient
  • Full flow oil filter, spin on type
  • Fuel filter with replaceable element
  • Dry type cartridge air filter
  • Polyethylene fuel tank with large diameter opening

Generator

  • Marathon Electric®
  • 6 kW standby output
  • 120/240 VAC – 50/25A
  • +/-6% capacitor voltage regulation

Engine Controls

  • Engraved, aluminum punched and anodized control panel
  • Four position keyed switch – glow plugs (preheat, off, run, start)
  • Hour meter
  • Automatic low oil/high temperature shutdown system

Electrical and System Controls

  • Individual floodlight circuits with 15A breakers
  • Ballast indicator lights
  • 30A start limit breaker (assures no load condition exists before starting)
  • Standard individually breakered convenience outlets
  • 440CCA wet cell battery

Floodlights

  • (4) light fixtures – 1000 watts each – metal halide
  • Oval aluminum reflector
  • Tempered glass lens
  • Silicone gaskets for moisture and dust protection
  • Friction disc mounting for tool less positioning
  • Individual floodlight On/Off switches

Mast

  • 30 ft. (9.14 m) maximum extension, 3-section
  • Tubular steel frame – 3 in. (76.2 mm) square tube with 3/16 in. (4.78 mm) wall
  • Urethane guides on all sides of mast tubes
  • Industrial black powder coat finish
  • 1500 lb. (680 kg) automatic self-breaking winches
  • Dual winch system located at ergonomic height allowing single person operation
  • 359° ground-level rotation with locking system
  • Coiled mast cord
  • Equipped with single lifting eye and fork pockets

Enclosure

  • Steel enclosure – 14-gauge
  • Stainless steel hinges on doors
  • Multi-lingual operating/safety decals
  • License plate holder with light
  • Manual holder with operating manual

Trailer

  • Removable tongue – 48 in. (1219.20 mm) long
  • (4) 2000 lb. (907.18 kg) adjustable leveling jacks – 4 point stance
  • All jacks transport and lock in horizontal position for storage
  • Side outriggers – 96.25 in. (2.45 m) span
  • 7800 lb. (3538 kg) safety chains with spring loaded safety hooks
  • 2 in. (50.8 mm) ball hitch
  • Single wall polyethylene fenders
  • DOT approved tail, side, brake, and directional lights
  • 2200 lb. (997.90 kg) leaf spring axle
  • ST175/80D13 – 6 ply
  • 40.75 in. (1035.05 mm) axle span

Trailer

  • Dry weight: 1657 lbs. (752 kg)
  • Operating weight: 1870 lbs. (848 kg)
  • Mast stowed: 170 x 49 x 68 in. (4.32 x 1.25 x 1.73 m)